MYJG-80 80W CO2 laser power supply
Model NO.80w
- Min.Order
- 1
- Category
- MYJG80W Laser Power Supply
Keywords
Product Attributes
| Min. Order | 1 |
|---|---|
| Model No. | 80w |
Product Description
MYJG-80 80W CO2 laser power supply-high-speed CO2 laser power supply
CO2 power supply Basic Info.
Input Voltage AC：220V or AC110V
AC Frequency ：47~440HZ
Cooling：Fan Cooling
Power Range: 100-120W
Transport Package:Standard Packing
Origin：China
Max Output Voltage： 26KV
Max Output Current ：28mA(Depends on Laser tube)
Weight (kg)：2.1
Efficiency：91%
laser power supply Precautions：
Laser tube cooling:
The laser tube must be water-cooled during operation.
High-voltage output:
The high-voltage output terminal must not be left open-circuited.
The positive and negative terminals of the high-voltage output must be correctly connected to the positive and negative terminals of the laser tube.
Residual voltage and safety:
A bleeder resistor has been incorporated into the power supply, which can generally discharge the residual voltage within 2 seconds after a power outage. However, for safety reasons
For the sake of completeness, it is still necessary to pay attention and guard against electric shock.
The two ends of the high-voltage output must ensure compliance with the insulation safety requirements of 40kV.
Grounding requirements:
The laser power supply must use a three-pin socket with a grounding terminal, and the casing must be strictly grounded to prevent electric shock.
