MYJG60W CO2 Laser Power Supply

<h2>MYJG60W CO2 Laser Power Supply</h2>

 

<p>The MYJG60W category includes high-voltage CO2 laser power supplies designed for 60W laser engraving and cutting equipment. These power supplies convert AC input into the high-voltage output required to drive a CO2 laser tube.</p>

 

<p>The model shown in this category supports AC 110V or AC 220V input options. Confirmed specifications include a maximum output current of 24mA, an output voltage of 26kV, and product dimensions of 197 × 161 × 91mm. The specified operating temperature range is −30°C to +65°C, with relative humidity from 20% to 85% RH under non-condensing conditions.</p>

 

<h3>MYJG60W Model Selection</h3>

 

<p>Before ordering, please check the input voltage, laser tube power, connector arrangement, control interface and installation space of your machine. Different MYJG60W product pages may focus on different voltage options, equipment applications or replacement requirements.</p>

 

<h3>Typical Applications</h3>

 

<ul>

  <li>CO2 laser engraving machines</li>

  <li>CO2 laser cutting machines</li>

  <li>60W laser equipment production and assembly</li>

  <li>Replacement and maintenance of laser machine power supplies</li>

</ul>

 

<h3>Important Safety Information</h3>

 

<p>This is a high-voltage power supply. Installation, wiring and testing must be performed by qualified personnel. Disconnect the AC input before installation or maintenance, and make sure the power supply and laser machine are properly grounded.</p>

 

<p>To select a suitable MYJG60W power supply, please send us the laser tube power, machine input voltage, existing power supply model and connector photos.</p>