MYJG-40 CO2 Laser power supply 110V/220V Generator
Model NO.40
- Min.Order
- 1
- Category
- MYJG Series Laser Power Supply
Keywords
Product Attributes
| Min. Order | 1 |
|---|---|
| Model No. | 40 |
| Brand | ZYE |
| Model | Myjg40 |
| Input Voltage | AC220V/AC110V (Adjust with Switch) |
| AC Frequency | 47~440HZ |
| Max Input Power | 250W |
| Max Input Current | 3A |
| Max Output Voltage | DC23KV DC5V DC24V |
| Max Output Current | DC20MA DC1A DC24A |
Product Description
MYJG-40 40W CO2 laser power supply for laser engraving machines
MYJG-40 CO2 Laser power supply Instructions for Use
Modular design:
CO2 Laser power supply features automatic detection of laser signals and water protection functions; the installation hole positions are uniform, facilitating assembly on factory assembly lines.
Efficient circuit:
Utilizing a zero-current half-bridge soft-switching circuit, it boasts high efficiency and rapid response, and is compatible with laser tubes from various manufacturers.
Simple control:
It supports high or low level control, and the laser start-stop can be achieved with TTL signals. It is equipped with an abnormal protection switch to monitor the water supply and ventilation status in real time.
Flexible power adjustment:
The laser power can be adjusted by inputting an analog signal ranging from 0 to 5V or a PWM signal.
Open circuit protection:
Under well-grounded conditions, the power supply can operate in an open-circuit state for a short period of time, effectively preventing damage to the power supply caused by laser tube bursting.
Strict testing:
Each CO2 Laser power supply undergoes a 12-hour high-temperature aging test at 60℃ under full load conditions, as well as 500 rapid start-stop tests, before leaving the factory, to ensure stability and reliability.
