120W CO2 Laser Power Supply for Laser Cutting
- Min.Order
- 1
- Category
- MYJG Series Laser Power Supply
Keywords
Product Attributes
| Min. Order | 1 |
|---|---|
| Origin | China |
| Input Voltage | AC220V/AC110V |
| Brand | ZYE |
| Efficiency | 91% |
| AC Frequency | 47~440HZ |
| Cooling | Fan Cooling |
| Working Temperature | -30 - +65 Degree Centigrade |
| Humidity | 20-85%RH(No Dew) |
| Model NO | MYJG-120W |
| Max Output Voltage | 30KV |
| Max Output Current | 32mA(Depends on Laser tube) |
| Color | Color |
| High-level | ≥3V |
| Low-level | ≤0.7V |
Product Description
120W CO2 Laser Power Supply, developed to meet the operational requirements of laser engraving machines, not only exhibits strong adaptability but also possesses rapid energy response capabilities. It can precisely match the power adjustment needs during engraving, and during operation, it generates low heat and optimizes energy consumption, balancing efficiency and energy saving。
CO2 power supply Precautions:
High-voltage output:
The high-voltage output terminal must not be left open-circuited.
The positive and negative terminals of the high-voltage output must be correctly connected to the positive and negative terminals of the laser tube.
Laser tube cooling:Water cooling must be activated during operation to prevent high temperatures from affecting equipment performance
Grounding requirements:
The laser power supply must be connected to a three-pin socket with a grounding terminal, and the casing must be strictly grounded to prevent electric shock
Residual voltage and safety:
The two ends of the high-voltage output must meet the insulation safety requirements of 40kV
The power supply has a built-in bleeder resistor, which usually discharges the residual voltage within 2 seconds after a power outage; however, caution should still be exercised to prevent electric shock.
